Italeri (ex-Accurate Miniatures) 1/48 scale
by Roland Sachsenhofer
North American A-36 Apache
At first sight the A-36 Apache looks like a representative of those early P-51 Mustang variants that were still powered by the American Allison engine. I would like to claim that even a second look will only produce few doubts to have a "Mustang" in front of you. Before a third look is risked, I would like to throw some light on the origin of the designation A-36 Apache.
Like every good story, the genesis of the P-51 Mustang does not run in a straight line - and the dramaturgy also knows the figure of the outsider, who against all expectations becomes a hero: N.A:A., "North American Aviation", at the time when a British procurement committee commissioned the design and construction of a fighter plane for the RAF, could only refer to scarce experience in the construction of single-engine aircraft - and literally none in the design of modern fighters. The original plan of the British was to order the production of a more powerful P-40 from the renowned manufacturer Curtiss. It was only after intensive negotiations, however, that N.A.A. was convinced to go for a completely new design.
The following unbelievably short and successful development of the NA-73X design towards the Mustang has written itself into history. One aspect of this amazing development is also the long lasting disinterest of USAAC in the superior fighter plane.
However, North American was not satisfied with this. After in contemporary Europe the "Blitzkrieg" seemed to confirm the concept of the dive bomber, the responsible persons decided to jump on this bandwagon: the Mustang I built for the British was further developed to a dive bomber by adding bomb locks and the installation of hydraulically operated dive brakes and was offered again to USAAC in this form.
Still uninterested in a new fighter, the Army Air Corp did not want to close its mind to a Stuka: In June 1942, a development contract was signed with NAA, which led to the delivery of the first aircraft to training units as early as autumn of that year. The official type designation for the new type was "A-36 Apache", but the name "Mustang", which was given by the British, was already so well known that it was used at the same time. After all good things come in threes, the name "Invader" should also be mentioned here, which accompanied the A-36 for some time. It was the result of a remark of a combat pilot to the press, it was in the news for some time, but finally it could not prevail over the official name.
The A-36 made its military debut in North Africa in May 43, where the 27th Bombardement Group (Light) and the 86th Bombardement Group (Dive) introduced the new design. For about a year the Apache and their pilots were able to gain an excellent reputation over Africa, Sicily and Italy before the units were converted. P-40 and P-47 replaced the A-36 in the fighter-bomber role and as a dive fighter, the surviving A-36s were transferred to training units.
Another arena where the Apache was able to prove its qualities was the theatre of war in India and Burma; the RAF also flew a few A-36s, which were mainly used here by reconnaissance units. A total of about 500 were produced.
My model shows a particularly interesting and photographically well documented A-36, which was flown by the 112th BS, 86th BG from the Algerian base Tafaraoui in summer 1943. A e special feature here are the two names "Herschel IV" and "Dotsie" as well as a possible marking with US flags on the tail unit, which was briefly used. I would have liked to implement this on the model! Why this did not happen, I will explain a little later.
My model was created from the Italeri kit, which presents the now older Accurate Miniatures shapes together with new marking variants in the form of a large and usable decal sheet.
The construction itself was relaxed. Whoever knows Accurate Miniatures shapes knows how convincing they can be in terms of accuracy of fit and excellent detailing. At the same time, the complexity in detail is combined with a rather simple part construction, which ensures a fast progress.
On the minus side I have noted that a certain caution is advisable regarding the fidelity of some kit shapes. I am thinking here especially of the representation of all MG barrels included in the kit, those in the nose are wrong in shape, as they run out to a strange tip, while the four MGs in the wings are shown with a covering, for which I have not found any models. The decision to replace these parts was additionally made easier by a completely blurred representation of the cooling jackets: the parts were replaced from a Brassin set by Eduard.
Etched parts can also be found in the representation of the seatbelts in the cockpit and the small propellers of the bomb fuses. I also replaced the pitot tube and the hydraulic lines on the landing gear and built them from wire myself.
After I wanted to represent a strongly stressed surface, the surface color was built up in several layers, which were partly covered with dabbed-on Maskol. This results in a worn and abraded overall impression of the paint, which is quite good for the job.
Although the decals are printed on a relatively thick carrier film, they can be used very well with appropriate pre- and post-treatment with glossy clear varnish. As often there is an exception that confirms the rule: the two US flags intended for the tail unit turned out to be such a "thick carpet" on the finely formed structures of the stern that I finally let the variant without "stars and stripes" come into play.
In conclusion I may say that I experienced this construction as a positive surprise. I did not expect such a quality of detail and at the same time an uncomplicated construction! The A-36 Apache now enriches the growing "mustang herd" in the showcase to my satisfaction. I would like to warmly recommend this kit to everyone who would also enjoy it.
If you are interested in the building process, please have a look here on Scalemates:
As ever, remarks will be appreciated: firstname.lastname@example.org
Model, Images and Text Copyright ©
2020 by Roland Sachsenhofer
Page Created 9 June, 2020
30 June, 2020
Back to HyperScale Main Page